2017/4/19 16:31:35
电厂灰坝渣场防渗工程土工膜的铺设方法-泰安瑞恒!
土工膜的铺设方法,泰安市瑞恒土工材料有限公司提醒您:Ash dam slag yard engineering of geomembrane laying method - the most professional Tai'an ruiheng!
Geomembrane laying method, Tai'an City Ruiheng geotechnical material limited company to remind you:
1 laying geomembrane before the civil engineering a corresponding qualification and acceptance certificate.
2 - geotechnical membrane cut before, should measure the correlation dimension, then according to the actual cutting, the general should not be to press the cutting size, should one piece number, recorded in detail in special form.
3 laying geomembrane should strive to weld the least, under the premise of guaranteeing quality, as far as possible to save raw material. It is also easy to ensure quality.
4 membrane and membrane joints between lap width not less than 10cm, usually make welds arrangement direction parallel to the maximum slope, along the slope direction.
Normally in the corner and deformity of 5 lots, should be the length of the joint to reduce short. Except special requirement, the slope is greater than 1:6 slope away from the top of slope and the stress concentration area within 1.5 meters, as far as possible without weld.
6 geotechnical membrane in laying, should avoid artificial fold, when the temperature is low, should be taut,paving.
7 geomembrane laying is completed, should be minimized in the membrane surface running, move tool, that can cause harm to the impermeable membrane object, shall not put in the film or carried in the film walk, so as to avoid accidental injury of membrane.
泰安市瑞恒土工材料有限公司
联系人: 马经理
手 机: 13505480586
电 话: 0538-8191971
地 址: 泰安市东高新技术开发区
Copyright © 2025 泰安恒瑞 版权所有